View L2PNM-HC_932870.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

3/8" Foam Dielectric, LDF Series - 50-ohm
LDF2-50
Description Type No.
Attenuation and Average Power Ratings
Frequency MHz 0.5 1 1.5 2 10 20 30 50 88 100 108 150 174 200 300 400 450 500 512 600 700 800 824 894 960 1000 1250 1500 1700 1800 2000 2100 2200 2300 3000 3400 4000 5000 6000 8000 10000 12000 13500 Attenuation dB/100 ft 0.072 0.101 0.124 0.143 0.323 0.458 0.563 0.730 0.976 1.04 1.08 1.29 1.39 1.49 1.85 2.15 2.29 2.42 2.45 2.67 2.90 3.12 3.17 3.31 3.44 3.52 3.98 4.40 4.72 4.87 5.17 5.32 5.46 5.60 6.52 7.00 7.70 8.78 9.79 11.7 13.4 15.0 16.2 Attenuation dB/100 m 0.235 0.332 0.407 0.471 1.06 1.50 1.85 2.40 3.20 3.42 3.56 4.22 4.56 4.90 6.06 7.06 7.51 7.95 8.05 8.76 9.52 10.2 10.4 10.9 11.3 11.6 13.1 14.4 15.5 16.0 17.0 17.4 17.9 18.4 21.4 23.0 25.3 28.8 32.1 38.2 43.9 49.2 53.0 Average Power, kW 15.6 15.6 15.6 15.6 7.23 5.09 4.14 3.19 2.39 2.24 2.15 1.81 1.68 1.56 1.26 1.08 1.02 0.963 0.951 0.874 0.804 0.748 0.736 0.704 0.678 0.663 0.586 0.530 0.494 0.479 0.451 0.439 0.428 0.417 0.358 0.333 0.303 0.266 0.239 0.200 0.175 0.156 0.145
Cable Ordering Information
Standard Cable 3/8" Standard Cable, Standard Jacket Fire Retardant Cables 3/8" Fire Retardant Jacket (CATVX) 3/8" Fire Retardant Jacket (CATVR) Low VSWR and Specialized Cables 3/8" Low VSWR, specify operating band Phase Stabilized and Phase Measured Cable Jumper Cable Assemblies - See page 584
** Insert suffix number from "Low VSWR Specifications" table, page 495
LDF2-50
LDF2RN-50 LDF2RN-50
LDF2P-50-(**) See page 590
Characteristics
Electrical Impedance, ohms Maximum Frequency, GHz Velocity, percent Peak Power Rating, kW dc Resistance, ohms/1000 ft (1000 m) Inner Outer dc Breakdown, volts Jacket Spark, volts RMS Capacitance, pF/ft (m) Inductance, H/ft (m) Mechanical Outer Conductor Copper Inner Conductor Copper-Clad Aluminum Diameter over Jacket, in (mm) 0.44 (11) Diameter over Copper Outer Conductor, in (mm) 0.38 (9.7) Diameter Inner Conductor, in (mm) 0.122 (3.1) Minimum Bending Radius, in (mm) 3.75 (95) Number of Bends, minimum (typical) 15 (60) Bending Moment, lb-ft (N*m) 1.4 (1.9) Cable Weight, lb/ft (kg/m) 0.08 (0.12) Tensile Strength, lb (kg) 250 (113) Flat Plate Crush Strength, lb/in (kg/mm) 110 (2.0) 50 1 13.5 88 15.6 1.06 (3.48) 0.87 (2.85) 2500 5000 23.0 (75.5) 0.058 (0.19)
www..com
Standard Conditions: For attenuation. VSWR 1.0, ambient temperature 20C (68F). For Average Power, VSWR 1.0, ambient temperature 40C (104F), inner conductor temperature 100C (212F), no solar loading.
* U.K. 0800-250055 * Australia 1800-803 219 * New Zealand 0800-441-747
Visit us at: www.andrew.com
493
www..com
N Male L2PNM-H
N Female L2PNF
7-16 DIN Male L2PDM-C
UHF Male L42P
TNC Male L2PTM
SMA Male L42WS
Connectors
Interface N Male N Male N Female N Female 4.1/9.5 DIN 4.1/9.5 DIN 4.1/9.5 DIN 7-16 DIN Male 7-16 DIN Female 7-16 DIN Female UHF Male UHF Female SMA Male TNC Male TNC Female Description Hex Head Hex Head - Bulk Head - - Right Angle - - Panel Mount - - - - - Type Number L2PNM-H L2PNM-HC L2PNF L2PNF-BH L2PKM-C L2PKM L2PKR-C L2PDM-C L2PDF-C L2PDF-PMC L42P L42U L42WS L42EWT L42ENT Inner Contact Attachment Solder Captivated Solder Solder Captivated Solder Captivated Captivated Captivated Captivated Solder Solder Solder Solder Solder Outer Contact Attachment Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Self-Flare Plating Code SG SG SG SG SS SS SS SS SS SS BB BB BG NG NG Max. Length in (mm) 2.1 (53) 2.1 (53) 2.4 (61) 2.4 (61) 1.9 (48) 1.9 (48) 2.0/1.5 (50/38) 1.9 (48) 1.9 (48) 1.9 (48) 2.3 (58) 2.3 (58) 2.2 (56) 2.1 (53) 1.9 (48) Max. Dia. in (mm) 0.94 (23.9) 0.94 (23.9) 0.63 (16.0) 0.88 (22.4) 0.95 (24.1) 0.95 (24.1) 0.95 (24.1) 1.1 (27.9) 1.4 (35.6) 1.25 (31.8) 0.68 (17.3) 0.91 (23.1) 0.68 (17.3) 0.68 (17.3) 0.68 (17.3)
Plating Codes: BB - Brass Body and Pin, BS - Brass Body and Silver Plated Pin, NG - Nickel Plated Body and Gold Plated Pin, SG - SIlver Plated Body and Gold Plated Pin, SS - Silver Plated Body and Pin
Connector Accessories - See page 624 Factory Attached Connectors - For factory made cable assemblies and jumper cables, see pages 584-587.
494
Customer Service Center - Call toll-free from: * U.S.A., Canada and Mexico 1-800-255-1479
Low VSWR Specifications, Type LDF2P-50-( )
Frequency Band, GHz 0.806-0.960 0.806-0.960 and 1.7- 2.3 1.7- 2.3 Up to 2.3 * Up to 4.2 * Up to 8.5 * Up to 13.5 * Type No. LDF2P-50-40 LDF2P-50-42 LDF2P-50-41 LDF2P-50-1 Using Connector Type** N 7-16 DIN N 7-16 DIN N 7-16 DIN N Male N Female TNC Male N Male N Female N Male N Male: L2PNM Assembly VSWR, Maximum (R.L., dB) 0-10 ft (0-3 m) 10-20 ft (3-6 m) 1.08 (28.3) 1.08 (28.3) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.15 (23.1) 1.15 (23.1) 1.20 (20.8) 1.20 (20.8) 1.35 (16.6) 1.25 (19.9) 1.30 (17.7) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.10 (26.4) 1.20 (20.8) 1.25 (19.9) 1.30 (17.7) 1.35 (16.6) 1.45 (14.7) 1.35 (16.6) 1.35 (16.6)
LDF2P-50-2 LDF2P-50-3 LDF2P-50-4
* Specify operating band. ** Connectors ordered separately. VSWR values apply to straight connectors only, are guaranteed for factory fit assemblies, and are typical for cut lengths. If two different connector interfaces are selected, the higher VSWR value is guaranteed.
Accessories
Description Type No. Description Type No.
Hangers - For more hangers, adapters and mounting hardware
see pages 599-607 Insulated Hanger, single. Recommended maximum spacing is 2.5 ft (0.76 m). For different spacing recommendations, refer to Cable Hanger Spacing, page 593-598 11662-3 Angle Adapter, for insulated hanger 40430-1 Nylon Cable Tie Kit of 50, Indoor use, Recommended maximum spacing is 1.5 ft (0.5 m) 40417 Nylon Cable Tie Kit in plastic box. 100 each 4, 5.5 and 7.5 inch ties. Indoor use, Recommended maximum spacing is 1.5 ft (0.5 m) CT-K350 Velcro Cable Ties, Black, 8 inch. Indoor Use Kit of 10 VCT8-10 Kit of 50 VCT8-50 Kit of 100 VCT8-100 Support/Hoisting Grip. Use at 200-ft (60m) intervals. Grip with one clamp L2SGRIP Support clamp kit of 10 L2SGRIP-2IK
Weatherproofing - for additional weatherproofing information
see pages 617-618 Cold Shrink Weatherproofing Kit 3/8" Coax to 3/8" Coax with N Connector 5/8" Coax to 3/8" Coax 7/8" Coax to 3/8" Coax 1-1/4" or 1-5/8" Coax to 3/8" Coax 2 1/4" Coax to 3/8" Coax 3/8" Coax to 1-1/2" Omni Panel Base type N or DIN 3/8" Coax to 2" Omni Panel Base type N or DIN Connector/Splice Weatherproofing Kit
241475-10 241475-13 241475-9 241475-5A 241475-8 241548-8 241548-9 221213
Entry Systems - For entry systems offerings see pages 619-620
Standard Cable Entry Boots 4" Boots - Three Hole: 5" Boots - One Hole: 204679A-19 48939A-16
Tools - for additional tool offerings see pages 620-623
EASIAX(R) Plus Automated Cable Prep Tool for: DIN Connectors N Connectors DIN Connector Coupling Torque Wrench N Connector Coupling Torque Wrench CPT-E2L2DIN CPT-E2L2N 244377 244379
Grounding and Surge Protection - for additional grounding
kits and our surge protection offerings, see pages 609-616 Standard Grounding Kit Factory attached one-hole lug, 24" lead 223158 Factory attached two-hole lug, 24" lead 223158-2 Field attached one-hole lug, 36" lead 223158-3
* U.K. 0800-250055 * Australia 1800-803 219 * New Zealand 0800-441-747
Visit us at: www.andrew.com
495

▲Up To Search▲

Price & Availability of L2PNM-HC

	To Download L2PNM-HC Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .